Skip to content may earn a commission when you buy through links on our site.
Home » Electronics » Computer

How to Create a Bootable Installer for MacOS UniBeast

If you’re going to make your own Hackintosh, you’ll need a bootable installer. Creating a bootable USB installer is the easiest, most universally accepted way. You can create an installer for any macOS version, from Mojave to any other version.

New to hackintosh? – take a look at our what is hackintosh guide.

And there are several different methods to create a bootable installer for macOS.

Today, I am going to cover what I believe is the easiest way to create an installer. Other methods will work well, but there is no need to overcomplicate things.

How to Create a Bootable Installer for MacOS UniBeast

What You’ll Need to Get Started

You’ll need a few things before getting started, and this will include:

  • UniBeast– you’ll need an account
  • macOS that you want to install (check the App Store)
  • USB drive (I recommend a minimum of 16 GB of space)
  • Mac device

If you have everything ready, you’ll then be able to proceed.

Creating a Bootable Installer for macOS Using UniBeast

You’ve downloaded everything that you need to get started and have your USB drive handy. Now, you’ll want to search for “Disk Utility” by hitting Command+space. You’ll need to do this to prepare your USB drive.


Open the Disk Utility, select your USB drive that you’ll be using as your installer and choose the following options when erasing it:

  • USB as the name
  • Mac OS Extended Journal as the format
  • GUID Partition Map as the scheme

Note: Make sure you choose the right device or you’ll be erasing a device that may have data that you want to save. Everything on your drive will be deleted, so make a backup of any important documents or files that may exist on the USB.

Open UniBeast and continue through the terms and any prompts that come up.

Finally, you’ll be at the Destination Select option, and this is where you’ll be choosing the USB drive that you just formatted. Click continue after selecting the drive. Finally, you’ll be choosing your operating system that you’ll be making for the bootable installer.

Let’s use macOS Mojave as an example. Select the operating system and continue.

If you didn’t have your desired operating system listed, make sure that the operating system is stored in the Application folder.

After this, you’ll enter into the Bootloader Configuration. Follow these steps:

  1. Select UEFI Boot mode, but if your device doesn’t support it, choose Legacy Boot mode and click continue.
  2. Inject ATI or NVIDIA if you have either graphics card. Otherwise, click
  3. Verify all of your options and then continue.

You’re just about done at this point. You’ll need to enter your password before the app will continue, and once you do, the app will start to create your bootable device. While everything is copying over and being created, it’s important that you don’t restart or power down.

The app will alert you when the installation was successful.

UniBeast will take about 10 minutes to create the bootable USB.

What’s nice about UniBeast is that a basic bootloader is created based on other people’s testing of their Hackintoshes. You can also choose to use Clover or another advanced application, but there’s no reason to do that with the majority of UniBeast bootloaders.

The only thing left to do is test out your installer. Make sure that it’s plugged into your USB port and then restart the computer. When it’s booting, you’ll want to choose which boot device to load up.

Every motherboard and BIOS can be different, but the main motherboards have the following hotkeys to choose a boot device:

  • ASUS – F8
  • ASrock – F11
  • Gigabyte – F12

You’ll then choose your USB as your boot device, and you’ll then follow the installer for the rest of the setup.


Hackintosh laptops

top rated hackintosh motherboards

Share this post on social!

Richard Bolden

David has been interested in computers for over 25 years. From playing games on his parents computer as a kid in the early 90s, to building his first PC in 2003 (and many more since then). He has a passion for everything related to computing and this site is dedicated to helping others find the info they need.